Visiba Care Fhir Implementation Guide - Local Development build (v0.2.0). See the Directory of published versions

## Resource Profile: PatientProfile - Detailed Descriptions

Active as of 2022-04-13

Definitions for the patient-profile resource profile.

- Differential Elements Table
- Key Elements Table
- Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here.

1. Patient
2. Patient.telecom
Control | 0..?
3. Patient.telecom.extension:PatientConsentExtension
SliceName | PatientConsentExtension
Control | 0..1
Type | Extension(PatientConsentExtension) (Extension Type: boolean)

Guidance on how to interpret the contents of this table can be found here.

1. Patient
Definition | Demographics and other administrative information about an individual or animal receiving care or other health-related services.
Control | 0..*
Summary | false
Alternate Names | SubjectOfCare Client Resident
Invariants | Defined on this element dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. Patient.implicitRules
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Control | 0..1
Type | uri
Is Modifier | true
Summary | true
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. Patient.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Control | 0..*
Type | Extension
Is Modifier | true
Summary | false
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. Patient.active
Definition | Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules. It is often used to filter patient lists to exclude inactive patients Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.
Control | 0..1
Type | boolean
Is Modifier | true
Summary | true
Requirements | Need to be able to mark a patient record as not to be used because it was created in error.
Comments | If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Patient.deceased[x]
Definition | Indicates if the individual is deceased or not.
Control | 0..1
Type | Choice of: boolean, dateTime
[x] Note | See Choice of Data Types for further information about how to use [x]
Is Modifier | true
Summary | true
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Patient.link
Definition | Link to another patient resource that concerns the same actual patient.
Control | 0..*
Type | BackboneElement
Is Modifier | true
Summary | true
Requirements | There are multiple use cases: Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and Distribution of patient information across multiple servers.
Comments | There is no assumption that linked patient records have mutual links.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Patient.link.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Control | 0..*
Type | Extension
Is Modifier | true
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
8. Patient.link.other
Definition | The other patient resource that the link refers to.
Control | 1..1
Type | Reference(Patient|RelatedPerson)
Summary | true
Comments | Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Patient.link.type
Definition | The type of link between this patient resource and another patient resource.
Control | 1..1
Binding | The codes SHALL be taken from LinkType The type of link between this patient resource and another patient resource.
Type | code
Summary | true
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Patient
Definition | Demographics and other administrative information about an individual or animal receiving care or other health-related services.
Control | 0..*
Summary | false
Alternate Names | SubjectOfCare Client Resident
2. Patient.id
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Control | 0..1
Type | id
Summary | true
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation.
3. Patient.meta
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Control | 0..1
Type | Meta
Summary | true
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. Patient.implicitRules
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Control | 0..1
Type | uri
Is Modifier | true
Summary | true
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Patient.language
Definition | The base language in which the resource is written.
Control | 0..1
Binding | The codes SHOULD be taken from CommonLanguages A human language
Additional Bindings | Purpose
AllLanguages | Max Binding
Type | code
Summary | false
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Patient.text
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Control | 0..1
Type | Narrative
Summary | false
Alternate Names | narrative, html, xhtml, display
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Patient.contained
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.
Control | 0..*
Type | Resource
Summary | false
Alternate Names | inline resources, anonymous resources, contained resources
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
8. Patient.extension
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control | 0..*
Type | Extension
Summary | false
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. Patient.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Control | 0..*
Type | Extension
Is Modifier | true
Summary | false
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. Patient.identifier
Definition | An identifier for this patient.
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..*
Type | Identifier
Summary | true
Requirements | Patients are almost always assigned specific numerical identifiers.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Patient.active
Definition | Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules. It is often used to filter patient lists to exclude inactive patients Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.
Control | 0..1
Type | boolean
Is Modifier | true
Summary | true
Requirements | Need to be able to mark a patient record as not to be used because it was created in error.
Comments | If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Patient.name
Definition | A name associated with the individual.
Control | 0..*
Type | HumanName
Summary | true
Requirements | Need to be able to track the patient by multiple names. Examples are your official name and a partner name.
Comments | A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Patient.telecom
Definition | A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.
Control | 0..*
Type | ContactPoint
Summary | true
Requirements | People have (primary) ways to contact them in some way such as phone, email.
Comments | A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Patient.telecom.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control | 0..1
Type | string
XML Representation | In the XML format, this property is represented as an attribute.
Summary | false
15. Patient.telecom.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control | 0..*
Type | Extension
Summary | false
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
Slicing | This element introduces a set of slices on Patient.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: value @ url
16. Patient.telecom.extension:PatientConsentExtension
SliceName | PatientConsentExtension
Definition | Optional Extension Element - found in all resources.
Control | 0..1
Type | Extension(PatientConsentExtension) (Extension Type: boolean)
Summary | false
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
17. Patient.telecom.system
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact.
Control | 0..1 This element is affected by the following invariants: cpt-2
Binding | The codes SHALL be taken from ContactPointSystem Telecommunications form for contact point
Type | code
Summary | true
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Patient.telecom.value
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Control | 0..1
Type | string
Summary | true
Requirements | Need to support legacy numbers that are not in a tightly controlled format.
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. Patient.telecom.use
Definition | Identifies the purpose for the contact point.
Control | 0..1
Binding | The codes SHALL be taken from ContactPointUse Use of contact point
Type | code
Is Modifier | true
Summary | true
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. Patient.telecom.rank
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Control | 0..1
Type | positiveInt
Summary | true
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. Patient.telecom.period
Definition | Time period when the contact point was/is in use.
Control | 0..1
Type | Period
Summary | true
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Patient.gender
Definition | Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.
Control | 0..1
Binding | The codes SHALL be taken from AdministrativeGender The gender of a person used for administrative purposes
Type | code
Summary | true
Requirements | Needed for identification of the individual, in combination with (at least) name and birth date.
Comments | The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Patient.birthDate
Definition | The date of birth for the individual.
Control | 0..1
Type | date
Summary | true
Requirements | Age of the individual drives many clinical processes.
Comments | At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
LOINC Code | 21112-8
24. Patient.deceased[x]
Definition | Indicates if the individual is deceased or not.
Control | 0..1
Type | Choice of: boolean, dateTime
[x] Note | See Choice of Data Types for further information about how to use [x]
Is Modifier | true
Summary | true
Requirements | The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.
Comments | If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. Patient.address
Definition | An address for the individual.
Control | 0..*
Type | Address
Summary | true
Requirements | May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.
Comments | Patient may have multiple addresses with different uses or applicable periods.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Patient.maritalStatus
Definition | This field contains a patient's most recent marital (civil) status.
Control | 0..1
Binding | The codes SHALL be taken from Marital Status Codes; other codes may be used where these codes are not suitable The domestic partnership status of a person
Type | CodeableConcept
Summary | false
Requirements | Most, if not all systems capture it.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Patient.multipleBirth[x]
Definition | Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).
Control | 0..1
Type | Choice of: boolean, integer
[x] Note | See Choice of Data Types for further information about how to use [x]
Summary | false
Requirements | For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.
Comments | Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Patient.photo
Definition | Image of the patient.
Control | 0..*
Type | Attachment
Summary | false
Requirements | Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.
Comments | Guidelines: Use id photos, not clinical photos. Limit dimensions to thumbnail. Keep byte count low to ease resource updates.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Patient.contact
Definition | A contact party (e.g. guardian, partner, friend) for the patient.
Control | 0..*
Type | BackboneElement
Summary | false
Requirements | Need to track people you can contact about the patient.
Comments | Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) pat-1: SHALL at least contain a contact's details or a reference to an organization (: name.exists() or telecom.exists() or address.exists() or organization.exists())
30. Patient.contact.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control | 0..1
Type | string
XML Representation | In the XML format, this property is represented as an attribute.
Summary | false
31. Patient.contact.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control | 0..*
Type | Extension
Summary | false
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
32. Patient.contact.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Control | 0..*
Type | Extension
Is Modifier | true
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
33. Patient.contact.relationship
Definition | The nature of the relationship between the patient and the contact person.
Control | 0..*
Binding | The codes SHALL be taken from PatientContactRelationship; other codes may be used where these codes are not suitable The nature of the relationship between a patient and a contact person for that patient
Type | CodeableConcept
Summary | false
Requirements | Used to determine which contact person is the most relevant to approach, depending on circumstances.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Patient.contact.name
Definition | A name associated with the contact person.
Control | 0..1
Type | HumanName
Summary | false
Requirements | Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. Patient.contact.telecom
Definition | A contact detail for the person, e.g. a telephone number or an email address.
Control | 0..*
Type | ContactPoint
Summary | false
Requirements | People have (primary) ways to contact them in some way such as phone, email.
Comments | Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Patient.contact.address
Definition | Address for the contact person.
Control | 0..1
Type | Address
Summary | false
Requirements | Need to keep track where the contact person can be contacted per postal mail or visited.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. Patient.contact.gender
Definition | Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.
Control | 0..1
Binding | The codes SHALL be taken from AdministrativeGender The gender of a person used for administrative purposes
Type | code
Summary | false
Requirements | Needed to address the person correctly.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Patient.contact.organization
Definition | Organization on behalf of which the contact is acting or for which the contact is working.
Control | 0..1 This element is affected by the following invariants: pat-1
Type | Reference(Organization)
Summary | false
Requirements | For guardians or business related contacts, the organization is relevant.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Patient.contact.period
Definition | The period during which this contact person or organization is valid to be contacted relating to this patient.
Control | 0..1
Type | Period
Summary | false
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. Patient.communication
Definition | A language which may be used to communicate with the patient about his or her health.
Control | 0..*
Type | BackboneElement
Summary | false
Requirements | If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.
Comments | If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. Patient.communication.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control | 0..1
Type | string
XML Representation | In the XML format, this property is represented as an attribute.
Summary | false
42. Patient.communication.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control | 0..*
Type | Extension
Summary | false
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
43. Patient.communication.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Control | 0..*
Type | Extension
Is Modifier | true
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
44. Patient.communication.language
Definition | The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.
Control | 1..1
Binding | The codes SHOULD be taken from CommonLanguages A human language
Additional Bindings | Purpose
AllLanguages | Max Binding
Type | CodeableConcept
Summary | false
Requirements | Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.
Comments | The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. Patient.communication.preferred
Definition | Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).
Control | 0..1
Type | boolean
Summary | false
Requirements | People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.
Comments | This language is specifically identified for communicating healthcare information.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. Patient.generalPractitioner
Definition | Patient's nominated care provider.
Control | 0..*
Type | Reference(Organization|Practitioner|PractitionerRole)
Summary | false
Alternate Names | careProvider
Comments | This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues. Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. Patient.managingOrganization
Definition | Organization that is the custodian of the patient record.
Control | 0..1
Type | Reference(Organization)
Summary | true
Requirements | Need to know who recognizes this patient record, manages and updates it.
Comments | There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. Patient.link
Definition | Link to another patient resource that concerns the same actual patient.
Control | 0..*
Type | BackboneElement
Is Modifier | true
Summary | true
Requirements | There are multiple use cases: Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and Distribution of patient information across multiple servers.
Comments | There is no assumption that linked patient records have mutual links.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. Patient.link.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Control | 0..1
Type | string
XML Representation | In the XML format, this property is represented as an attribute.
Summary | false
50. Patient.link.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Control | 0..*
Type | Extension
Summary | false
Alternate Names | extensions, user content
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
51. Patient.link.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Control | 0..*
Type | Extension
Is Modifier | true
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
52. Patient.link.other
Definition | The other patient resource that the link refers to.
Control | 1..1
Type | Reference(Patient|RelatedPerson)
Summary | true
Comments | Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. Patient.link.type
Definition | The type of link between this patient resource and another patient resource.
Control | 1..1
Binding | The codes SHALL be taken from LinkType The type of link between this patient resource and another patient resource
Type | code
Summary | true
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))